Job Listings

At a Glance Legrand has an exciting opportunity for a Test Lab Technician to join the Kenall Team in Kenosha, WI.  What Will You Do?Perform testing functions required for new product development and to integrate new technologies into existing product lines. ESSENTIAL JOB FUNCTIONS:· Work under the general direction of the Compliance and Test Managers.· Organize test lab; maintain lab equipment, testing software, tools and testing supplies.· Understand product testing programs, and work with the designers to explain test procedures and Standards requirements for our products.· Troubleshoot and test for product/performance related field complaints and suggest possible solutions.· Interact with product designers, engineers and draftspersons where required to support product development.· Work with compliance personnel to investigate whether products are designed to meet or exceed all applicable specifications.· Perform failure analysis on fixtures as a result of field or production line problems.· Manage, prioritize and schedule physical testing labs to ensure proper operation, safety and cleanliness.· Assist Testing and Compliance Manager with UL/ETL submissions, quotations, and general file maintenance.· Facilitate and manage UL and ETL factory inspections.· Assist, supervise and train Junior Lab Technicians.· Perform high-level tests including EMI, Photometric, Water and Dust, and HALT/HASS testing. Must be able to complete these tests quickly and efficiently with minimal to no supervision. GENERAL RESPONSIBILITIES:· Active participation in ongoing individual training / development program.· Set goals and objectives with Manager; look for ways to improve quality and productivity.· Maintain good housekeeping conditions in work area.· Follow safety rules and procedures.· Report abnormalities in equipment, machines, programs and processes.· Perform backup functions to other team members and to immediate supervisor as instructed. Engage in cross-training to support backup efforts as directed.· Perform other duties as assigned

At a Glance Legrand has an exciting opportunity for a Mechanical Engineer Intern to join the Starline Team in Canonsburg, PA. The Mechanical Engineer Intern will provide support to the Engineering Department and will contribute to the commercialization, application, and customization of all Starline products. This position will work under clearly defined guidelines and close supervision of the Engineering Manager and other Mechanical Engineers. What Will You Do?· Assist in mechanical engineering design tasks in support of customer-specific customizations of Starline products.· Assist in creating technical documentation such as drawings, Engineering Design Instructions, Engineering Work Instructions and wiring diagrams.· Support the integration of 3rd-party products with Starline’s product offerings.· Support the resolution of design issues encountered during product manufacturing by collaborating with operators, documenting required changes through the Engineering Change process and authoring Engineering Deviation Authorizations.· Assist in supporting improvements to Starline’s engineering information systems to ensure high-quality engineering information is provided to production and other customers of this information.· Participate in projects centered around Legrand’s Sustainability Compliance initiatives, including efforts to provide Product Environmental Profile (PEP) marking on all Starline products.· Participate in Team-based initiatives within Starline.· Other duties as assigned by management.

At a Glance Legrand has an exciting opportunity for a Mechanical Engineer to join the Lighting Sector Kenall Team in Kenosha, WI. Responsible for product design and modification to meet customer needs. Position will also assist Program Manager in facilitating product planning and development. Responsible for meeting schedules and technical product development. Position will also lead or participate in cost reduction and productivity process improvements as needed. What Will You Do?- Design and develop lighting products utilizing 3D parametric modeling systems.- Analyze and improve designs via thermal and static simulations.- Interface with prototype shops to build custom designs utilizing 3D printing, precision proto molding and precision machining.- Interface with performance laboratory regarding thermal, photometric and electrical conducted and radiated emission testing.- Own specific pieces of product design throughout the product lifecycle, maintaining all cost, performance, and schedule requirements.- Initiate and coordinate new vendors and alternate components.- Participate in productivity process improvements with manufacturing engineering.- Serve as a technical resource for purchasing.- Perform ECNs, drafting, documentation, and as required.- Develop layouts and detailed drawings (flat, form, weld assemblies, etc.) using 3-D solid modeling software.- Occasional domestic travel expected.

At a Glance Legrand has an exciting opportunity for a Process Engineer Intern to join the Lighting Sector Finelite Team in Union City, CA. The Process Engineer Intern will evaluate current operations processes, efficiency and productivity and determine which projects to deploy, assigning the resources and drive continuous improvement projects from ideation to creation. The Process Engineer Intern will determine which projects will contribute the most for continuous improvement based on data collection and analysis and by collecting feedback from the operations personnel. The Process Engineer Intern will create and maintain a lean culture in operations and the entire organization using lean methodologies, trainings and guidance. What Will You Do?- Create and maintain a sustainable lean culture in the organization.- Collect and analyze data on existing process to identify opportunities for continuous improvement and lean processes.- This includes process, tools and equipment, and systems.- Participate in Kaizen events for continuous improvement.- Lead lean projects from ideation to creation.- Ensure timely completion of lean projects.- Lead problem solving initiatives.- Lead 5s and Housekeeping.

At a Glance Legrand has an exciting opportunity for a Mechanical Engineer II to join the Data Power and Control Division in Hickory, NC. The Mechanical Engineer II is responsible for the design and implementation of opto-mechanical components and assemblies, including product test validation, for new products, product enhancements, and VAVE/cost savings. Works individually or as part of a design team to develop, evaluate, and validate product designs and specifications. Also conducts design reviews, validates and approves documentation packages, preproduction builds, and production transfers. Provides mentor guidance and support to engineering team members across disciplines. Main Job Duties:- Provide direction and project management for opto-mechanical design and test validation efforts. Work closely with Product Marketing, Manufacturing, and other Engineering personnel during product conceptualization phases and throughout the project phases.- Provide maintenance of existing opto-mechanical products and documentation (design improvements, VAVE cost savings, etc.) and product databases through the Engineering Change process.- Coordinate internal rapid prototyping and production validation requirements using internal prototyping.- Coordinate with the internal Tooling Manager and Outside Design supplier.- Design and develop optomechanical systems and customized solutions, utilizing various methods such as injection molding, metal forming, casting, and extrusion processes.- Perform other similar and related duties as required. 

At a Glance Legrand has an exciting opportunity for a Sr. Test Engineer to join the Data Center Power and Control Division Team in Reno, NV. The Sr. Test Engineer will use knowledge of electrical theory to test, characterize, and debug low-voltage and high-voltage power distribution systems. The Sr. Test Engineer will coordinate basic and routine test activities between engineering and manufacturing to achieve the test objectives in a timely manner. This position will document all important aspects of the setup, performance, and results of the testing. The Sr. Test Engineer will ensure that all assigned duties are performed quickly, efficiently, and according to the established departmental and company policies, procedures, and goals. What Will You Do?- Develop and execute system-level procedures to be used for testing, validating, and characterizing new single-phase and multi-phase PDU designs and existing PDU products that exhibit problems.- Develop and execute comprehensive engineering test, characterization, reliability, and margin plans for printed circuit board assemblies.- Collaborate with peers to manage the development of test parameters to verify PDU products meet internal and external requirements.- Develop test fixtures and circuits required to execute engineering tests, validation, and characterization plans.- Generate code and test scripts to be used to run automated tests and data collection.- Write engineering reports and create presentations to document and communicate test, characterization, reliability, statistical analysis, and margin results along with recommended corrective actions.- Recommend design changes based on internal and external customer feedback.- Work with the Electrical Engineering Team and Project Management to determine the root cause of system-level validation failures and propose solutions.- Participate in design reviews of printed circuit boards and electro-mechanical assemblies. Review design for complete specifications and testability.- Contribute to inventions, new designs, and techniques regarded as advances in the power distribution/scientific community.- Perform other duties as assigned.

At a Glance Legrand has an exciting opportunity for a Mechanical Engineer to join the Data, Power & Control Division  in Farmingdale, NY. The Mechanical Engineer is responsible for engineer-to-order (ETO) projects. These projects utilize various configurations of existing design platforms. Ensure that custom configurations of existing and new designs meet customer requirements and can be produced within cost constraints. What Will You Do? Main Job Duties:- Manage and create manufacturing packages for custom-configured cabinet assemblies. Sheet-Metal experience preferred. - Develop Bills of Material and setting component routings in SAP. - Evaluate customer requirements outlined in various sales documents supplied.- Estimate engineering lead time required for all projects.- Create 3D CAD assembly files from existing CAD models of previously designed components and accessories - configure per customer requirements. SolidWorks preferred. Sheet-Metal experience preferred.- Design custom accessories in accordance with the EIA-310 standard.- Create detail part drawings, weldment drawings, assembly drawings, and BOMs. Write and process ECNs.- Create complete product structures with routings for the entire manufacturing package in the ERP system. SAP preferred.- Interface directly with all areas of production as required to support the progress and completion of projects.Additional Job Duties:- Interface directly with regulatory agencies such as UL. Assist in testing.- Design manufacturing fixtures as defined by project requirements.

At a Glance Legrand has an exciting opportunity for a Estimator to join the Solarfective Team. This position provides project pre-sales, design, fabrication, installation, and product support and specification for a wide range of Legrand shading products. What Will You Do? 1. Ownership of a diverse range of projects and accountable for the delivery of the full project management life cycle, including take-off, proposal, design, fabrication, installation and administrative tasks.2. Review tender documents including specifications, drawings and addendums.3. Prepare estimates based on contract bids, drawings and specifications.4. Design shades and shading systems or work with shading technical specialist on system design.5. Work with other functional areas throughout project execution and own projects from initiation until final invoicing. 6. Aid architects, shading dealers, and designers during design process to best suit product to specific site conditions.7. Develop and maintain relationships with shading dealers and architects.8. Assisting and instructing customers on product requirements relating to electrical or mechanical aspects of the project.9. Ensure effective control of projects: addressing conflicting priorities, issues, risks, dependencies and change.10. Track multiple concurrent projects and ensure all project objectives are met, including deadlines, cost, and customer expectations.11. Communicate project details effectively to stakeholders and project teams, including the preparation of technical reports, audits, sketches and special reports. In addition, providing daily and weekly progress reports and scheduling forecasts.12. Develop technical understanding of shading systems and their construction and be able to assist in troubleshooting the installation and operation of the systems.13. Utilize tools such as SFDC, Excel and PIC ERP for tracking and communication of job details and status.14. Participates in internal company and personal Continuous Improvement programs and initiatives. 15. Performs other similar and related duties as required. 

At a Glance Legrand has an exciting opportunity for an Electrical Engineer II to join the Kenall Team in Kenosha, WI. Key member of the electrical engineering group in the development, support, and coordination of New Product Development in the area of solid-state lighting with an emphasis on electrical products (PCB development, SW development, Electrical HW development). Position will also assist manager in facilitating product planning. Responsible for meeting schedules and technical product development. Position will also lead or participate in cost reduction and productivity process improvements as needed. ESSENTIAL JOB FUNCTIONS:- Design, and develop new products meeting cost, performance, and schedule requirements.- Design, testing, and validation of power supplies for lighting products.- Design of Printed Circuit Boards (PCBs) for lighting products.- Participate in defining scope and target objectives for new electrical designs.- Identify and support technical R&D projects with long-term IP value.- Initiate and coordinate new vendors and alternate components.- Lead/participate in cost reduction projects as required.- Lead/participate in productivity process improvements with manufacturing engineering.- Serve as a technical resource for purchasing.- Assist in the training and development of junior engineers. GENERAL RESPONSIBILITIES:- Active participation in ongoing individual training/development programs.- Set goals and objectives with manager; look for ways to improve quality and productivity.- Maintain good housekeeping conditions in work area.- Follow safety rules and procedures.- Report abnormalities in equipment, machines, programs, processes.- Perform backup functions to other team members and to immediate supervisor as instructed.- Engage in cross-training to support backup efforts as directed.- Perform other duties as assigned.

 At a Glance Legrand has an exciting opportunity for a Drafter 2 to join the Data Power & Control Division Starline Team in Canonsburg, PA. The Drafter 2 is responsible for creating mechanical and electrical drawings of low and medium complexity using a 3D CAD system and associated BOM via an ERP system. Drawing work supports Application Engineering, Marketing, and Sales. Works closely with Application Engineering Team members to provide customized solutions and products to high-profile customers. What Will You Do?- Create dimensioned drawings and 3D models based on input from engineers and customers.- Perform low and medium-complexity design work on components as directed including 3D library components and assemblies.- Create parts lists for new products.- Create catalog pages, illustrations, and animations; support work within the ERP system.- Perform a variety of tasks related to new design and project work, including but not limited to Purchasing support, Quality, Production assistance on new designs, and customer communication.- Organize the creation of demonstration units; work with Production to build prototypes of new mechanical and electrical designs.- Assist production personnel related to product assembly, testing, and methods.- Engineering drafting support to develop custom solutions for customers, conceptual drawings, and other project work.- Provides 2D overlay assembly system drawings for contractors, and end users.- Maintains public CAD library.- Ability to work independently with minimal supervision.- Will require interaction with existing or potential customers.- Assist with drawing and other support collateral for listing projects with VDE, UL, CSA, Intertek (ETL), etc.- Participate in customer meetings, presentations, site visits, and sales events- Ability to travel domestically and internationally up to 10% of the time.